z13_train_wheel-2 z13_worker-2 z13_valve-2 z13_emergency_vehicle-2 z13_radar-2 z13_electric_tower-2
z13_tornado-1a
logo-psi

Product Source International Datacomm
 

video

linkedin

201.488.6000

FTTx

fttx-znid-gpon-4111-front-med

Fiber Optic

PFS-SPLICER-500

Cyber
Security

ss-610261073-key-02

Disaggregated
Networking

img-virtual-network-1

Legacy TDM

AM3440-CHPAa-8GEHSWa-w8h6-1
PSI HOME ->  Manufacturers ->  Loop Telecom

 

 

Manufacturers

 

logo-psi

logo-loop-telecomLoop Telecom


Founding

In 1991, a group of established professionals from the communications industry founded Loop Telecom. These industry leaders, with decades of experience and years of service at Verizon, Tellabs and AT&T, realized the largely untapped engineering and production capabilities of Taiwan. Just ten years after founding, with its Western-style engineering and management, Loop Telecom met the earnings, market, and product diversity requirements to go public with its IPO. It is currently traded on the Taiwan Stock Exchange Corp., or TSEC (3025).

After finding success in its initial market coverage of just a few countries, including the United States and Taiwan, Loop Telecom has expanded its market outreach to over 80 countries around the world. Several sales offices have been established including Taiwan, France, the United States and Australia. Several TAC centers (Technical Assistant Center) have been setup including TAC-EMEA in Greece covering EMEA, TAC-USA in USA covering North America and TAC-ESAF in Kenya covering East and South Africa.
Diversity of Product Lines

Today, Loop Telecom has a strong portfolio of over 60 products in a wide range of technologies, including multiservice access for analogue, voice, data, and dedicate data for power industry with DS0, E1, T1, DS3, E3, OC3/STM-1, OC12/STM-4, OC48/STM-16 transport over TDM, SDH, TDMoE PseudoWire and PTN with MPLS or Carrier Ethernet. We produce also IP Access and Router and last mile or backhaul over fiber or G.SHDSL.

Loop Telecom has the following product lines:

  • Multi-service Cross Connect
     
  • Multi-service Cross Connect
  • SDH-SONET-MSTP
     
  • SDH-SONET-MSTP
  • TDM over IP/Ethernet
     
  • TDM over IP/Ethernet
  • PTN-MPLS-Carrier Ethernet
     
  • PTN-MPLS-Carrier Ethernet
  • Ethernet Access and Switch
     
  • Ethernet Access and Switch
  • Fiber-DSL Line Extension
     
  • Fiber-DSL Line Extension
  • Network Management
     
  • Network Management
  • Wavelength Division Multiplexing
     
  • Wavelength Division Multiplexing
     


Loop Telecom Solutions – Engineered for Mission-Critical Networks

We proudly offer Loop Telecom’s industry-leading telecommunications equipment, designed to meet the demands of modern infrastructure across sectors like transportation, utilities, oil & gas, enterprise, and public safety.


Loop Telecom’s product portfolio includes

  • Packet Transport Network (PTN): High-performance MPLS-TP and Carrier Ethernet solutions for scalable, reliable data transport
  • SDH/SONET Multiplexers: Robust ADM/TM systems for legacy and hybrid network environments
  • Industrial Ethernet Switches & Routers: Managed L2/L3 devices with PoE support, ideal for harsh environments and high-speed data needs
  • TDM over Ethernet (TDMoE): Seamless integration of legacy TDM systems into modern IP-based networks
  • WDM Platforms: Multi-service Wavelength Division Multiplexing for high-capacity optical transport
  • Network Management Systems: Intuitive tools like Loop-iNET and LoopView for centralized control and provisioning


Applications include

  • Mission-critical communications for railways, airports, and emergency services
  • Smart grid infrastructure for power utilities
  • Secure, high-speed networking for oil & gas operations
  • Enterprise-grade solutions for offices and surveillance systems
  • Carrier backhaul and fiber transport for telecom providers


Loop Telecom is ISO 27001 certified and committed to environmentally friendly, standards-compliant designs.


AM3440

We already have lots of loop information on  website.  Use that information.

V4150

Loop V4150 DS 0 Cross Connect System is a standard compliant high density DCS systems with full T1/E1 , T3MX3 and STM 1/OC3 cross connect rack system. The V4150 DS0 Cross Connect System designs to have full add and drop capability.

The CCA capability up to:

  • 8 STM 1/OC3 tributaries
  • 24 T3MX3 tributaries
  • 504 E1/T1 tributaries
  • DS0 non blocking cross connect matrix : 504 E1/ 672 T1


With system capacity support up to 504 E1/ 672 T1 DS0 non blocking cross connect matrix , the V4150 DS0 Cross Connect System can offer high density capacity up to 504 E1/T1, 24 T3 MX3 , or 8 STM 1(OC 3 )).

V4150 DCS offers the service provider protection schemes including 1+1 , 1:1 and 1: N protection for tributary cards

All interfaces are fully compliant with the relevant ETSI standards and ITU recommendations. The V4150 DCS provides powerful Operation, Administration, Maintenance and Provisioning (OAM&P) functionality, including fault management, performance monitoring, configuration management, and network security management. Through console port, LAN port, In band E1, the OAM&P can be achieved both locally and remotely via SNMP or menu driven interfaces.


Features

  • 6U height, full front access (ETSI) shelf
  • Hot swappable crossconnect modules, tributary modules and power modules
  • Temperature controlled fan tray
     
  • Digital Cross connect module s (controller modules)

    • System capacity support up to 504E1/672T1DS0 non blocking cross connect matrix - 1 + 1 protection
    • Type: Point to point and Broadcast
    • - E1/T1 Signaling Conversion, A/ µ Conversion
       
  • Tributary modules
     
    • 8 tributary slots
       
  • Single port STM 1 OC 3 module
  • Triple ports T3 MX3 modules
  • 16/32/63 ports E1/T1 tributary module
     
  • Power Modules
     
    • DC module 36 to 72 Vdc)
    • AC/ DC hybrid module 100 to 240 Vac; 36 to 72 Vdc)
    • Dual power (1+ 1) protection
       
  • Protection
     
    • Protection switching time less than 50ms
    • Controller DCS protection 1+1
    • Tributary protection
    • E1/T1: 1+1 and 1:1 per card and per port , N (n =1 to per card
    • B 155: 1+1 MSP
    • T3/MX3: Port 1:1 and Line 1+1
    • IPv4 and v6
    • External/Internal/Line timing source with SSM
    • Diagnostic : Test Access Path (TAP) with Monitor, Spilt and Release mode
       
  • Management
     
    • Console port, VT100 menu driven
    • Dual SNMP port : su pport v1 and v3
    • Telnet
    • Centralized management with Loop ’s EMS /NMS
    • LoopView GUI EMS Element Management System
    • TMN management (Loop iN MS) with full FCAPS and end to end c ircuit management
    • SSH


    • RoHS compliant

 

O9500R

The Loop-O9500R PTN/SDH/SONET/PDH IMAP (Integrated Multi-Services Access Platform) is an economical, all-in-one solution for integrating various types of signals and transportation over various types of networks within one enclosure. Its universal roles and modular design make it effortless to perform traffic grooming for both peripheral and core networks by providing access interfaces, multiplexing, cross-connection, gateways, and transportation channels.

For access interfaces, 10+ low-speed modules are designed to encapsulate industry specific signals into DS0 timeslots. These interfaces include Voice (e.g. FXS, FXO, E&M, and etc.), Digital (e.g. RS232, RS449, X.21, and etc.), Teleprotection (e.g. G.703, C37.94) and so on.

For multiplexing and cross-connection, O9500R provides non-blocking cross-connection of up to 672 DS0 timeslots, which equal to 21 E1 channels, to serve as a MUX/DACS, and VC-n/VT-n fabric for SDH/SONET non-blocking cross-connection to serve as an ADM.

For transportation, high-speed modules provide transportation channels such as 10Gb MPLS/Carrier Ethernet/IP switching and routing from PTN10G card, STM-1/4/16(OC-3/12/48) channels from Controller, B155/622, and B2G5 cards, Optical channels from 7-port FOM cards, E1/T1 channels from 63-port E1/T1 cards, and E3/T3 channels from 3-port E3/T3 cards.

For gateways, the signals from different interfaces can be freely encapsulated, cross-connected, and transported over a variety of transportation networks. For instance, E1/T1 and E3/T3 channels can be encapsulated into VT/VC paths and transported over SDH/SONET. Modules such as TDMoE and 8GESW make it possible for TDM traffic to be transported over Ethernet (DS0 over Ethernet) and the other way around (Ethernet over SDH/SONET) via circuit emulation and virtual concatenation technologies. Using the PTN10G card, SDH/SONET and DS0 circuits can also be encapsulated for packet network transportation.

Multiple protection schemes are designed at different levels, including path-level SNCP/UPSR and section-level MSP (1+1) for SDH/SONET, circuit and line protection for access interfaces, DS0 SNCP/UPSR and ULSR for low-speed modules, MPLS-TP with two LSPs per tunnel, ELPS and ERPS, and 1+1 module redundancy for power, controller, and plug-in cards.
Performance and fault are also monitored to ensure service integrity. Operation, Administration, Maintenance and Provisioning (OAM&P). These functionalities are fully incorporated into the operation system. O9500R is fully compatible with Loop-iNET (EMS) and Loop-iNMS (Integrated NMS) to achieve centralized management for large scale networks.


Features

  • 6U height, full front access (ETSI) shelf
  • SDH/SONET VCn/VTn Cross-Connect Capacity: 14Gbps bidirectional non-blocking
  • PTN (CE and MPLS-TP) Switching Capacity: 100Gbps bidirectional non-blocking
  • Hot-swappable modular design
     
  • Cross-connect unit (controller modules, XCU)
  • - STM-1/4/16 (OC-3/12/48) aggregate lines
    - Software configurable
     

  • Tributary Modules
  • - High-Speed/High Density (HS) modules (VC/VT XC)
    - Low-Speed (LS) modules (DS0 XC)
     

  • Power Modules (DC)
    - 48 Vdc, 500Wa
    - Dual Power (1+1) Protection
     
  • Cross-connect Unit Protection Scheme
     
    • Dual controller for redundancy
    • MSP (1+1)
    • SNCP/UPSR Ring
       
  • Protection Schemes
     
    • E1/T1: Card(1:1), Port (1:1), Line (1+1), DS0 SNCP (3E1/T1 card only)
    • E3/T3: Line (1+1)
    • XCU, B155/622: MSP 1+1, SNCP/UPSR
    • B2G5: MSP 1+1
    • Ethernet Card Protection
    • PTN10G Switch Fabric 1:1
    • MPLS tunnel LSP (1+1/1:1), switch time <50ms
       
  • Ethernet Functions
     
    • Link Aggregation (Inter and Intra board)
    • External/Internal/Line timing source with SSM via SyncE, IEEE 1588, and TDM clocks
    • Ethernet over SDH/SONET supports GFP, LAPS
       

Trib Cards
High-speed/ High Density (HS)
 

High-Speed / High Density (HS)

PTN10G

3 x 10GbE + 8 x 1GbE PTN plug-in module

PTNext

10 x 1GbE PTN plug-in module

B155/622

2-channel STM-1 (OC-3) tributaries with or without MSP 1+1
1-channel STM-4 (OC-12) tributaries with or without MSP 1+1

B2G5

1-channel STM-16 (OC-48) tributaries with or without MSP 1+1

E1/T1

63 port E1/T1 tributaries
32 port E1/T1 tributaries
16 port E1/T1 tributaries

E1(75 ohm)

63 E1(75 ohm) plug-in card
32 E1(75 ohm) plug-in card
16 E1(75 ohm) plug-in card

E3/T3

3 T3 or 3 E3 software programmable interface with M13/Mx3 function for T3 interface only

8GESW

8 GbE Ethernet over SDH card with L2 switch (8GES4SWA/8GES16SWA)

 

Low-Speed (LS) Single slot

RTB

8-port Bridge/Router

4E1/4T1

4-channel E1/T1

3E1/3T1*

3-channel E1/T1

2GH

2-channel G.SHDSL (2 pairs) without line power

4GH

4-channel G.SHDSL (1 pairs) without line power

8CD

8-channel G.703 card at 64 Kbps data rate

6CDA*

6-channel G.703 Interface at 64 Kbps data rate

4C37

4 channel C37.94 (low-speed optical)

8RS232

8-channel RS232/V.24

8DC

8-channel Dry Contact I/O

8DCB

8-channel Dry Contact I/O type B

8E&MA

8-channel 2W/4W E&M

12FXSA

12-channel FXS

12FXOA

12-channel FXO

12MAGA

12-channel Magneto

TDMoEA

4 GbE for TDM signal over Ethernet

8DBRA

8-channel Data Bridge

8UDTEA

8-channel DTE

1FOMB*

1 port FOM (1FOMB)

OCUDPA

8-channel OCU/DP

6UDTEA

6-channel DTE

Low-speed (LS) Dual slot

 

TTA

Four ports for DTT input and output

 

 

O9400R

The Loop-O9400R is a standards-compliant high density SDH/SONET/ADM/TM with a full T1/E1 cross-connect rack system.

The O9400R has full add-and-drop capability according to the figures below:

    - 1 STM-16 tributaries
    - 4 STM-4 tributaries
    - 16 STM-1 tributaries
    - 24 E3/T3 tributaries
    - 504 E1/T1 tributaries
    - 64 10/100/1000M Ethernet EoS tributaries
    - 6 10GbE and 16 1GbE tributaries
    - 1 10GbE or 10 1 GbE (PTNext) tributaries
     

With up to 4 STM-1/4/16 (OC-3/12/48) aggregate interfaces on cross-connect modules and 16 STM-1 (OC-3) interfaces on tributaries, the Loop-O9400R offers the service provider a versatile protection scheme including SNCP (UPSR), and MSP (1+1) protection for network topology. Path protection switching can be automatically or manually activated through a management system.
With the PTN10G interface card, the O9400R can transport SDH/SONET over PSN network. With O9400R as a gateway between SDH/SONET and PTN, existing SDH/SONET network users will be able to migrate from SDH/SONET/PDH to PTN network smoothly and seamlessly.

All interfaces are fully compliant with the relevant ETSI standards and ITU recommendations. The Loop-O9400R provides powerful Operation, Administration, Maintenance and Provisioning (OAM&P) functionality, including fault management, performance monitoring, configuration management, and network security management. Through a console port, OAM&P can be achieved both locally and remotely via SNMP or menu-driven interfaces.
The Loop-O9400R provides a complete set of operation interfaces that are consistent with the Telecommunication Management Network (TMN) concept (ITU Recommendation M.30, G.784) for SDH/SONET Network Element/Operations System (NE/OS), NE/NE, and NE/Craft communications. Users can easily operate the Loop-O9400R locally or remotely for centralized management.

 

Features
 

  • 6U height, full front access (ETSI) shelf support up to 2.5G Mbps backplane
  • SDH/SONET VCn/VTn Cross-Connect Capacity: 15Gbps bidirectional non-blocking
  • PTN (CE and MPLS-TP) Switching Capacity: 100Gbps bidirectional non-blocking
    • Modular design, Hot-swappable cross-connect modules, tributary modules, SFP and SFP+ optical
  • Hot-swappable cross-connect modules, tributary modules and power modules
  • Temperature-controlled fan tray
     
  • Aggregate cross-connect modules (controller modules)

    - Up to STM-1/4/16 (OC-3/12/48) aggregate lines with software configuration (CCPA)
     
  • Tributary modules: 8 tributary slots

    - Two ports STM-1 (OC-3) or One port STM-4 (OC-12) module
    - Three ports E3/T3 module
    - 16/32/63 ports E1/T1 tributary module
    - One port STM-16 (OC-48)
    - 8GE tributary module with L2 switch
    - PTN10G module (Three 10G or Eight 1G ports)
    - PTNext (One 10G or Ten 1G ports)
     
  • DC Power Module (-40 to -72 Vdc), 500W

    - Dual power (1+ 1) protection
     
  • Protection
    - Controller cross-connect unit (CCPA) protection, MSP (1+1), SNCP/UPSR Ring
     
  • Tributary Protection
     
    • E1/T1: Card/Port (1:1) using Y-box, Line (1+1)
    • E3/T3: Line (1+1)
    • B155/622: MSP, SNCP/UPSR
    • B2G5: MSP
    • Ethernet: Card protection
    • PTN Switch Fabric 1:1
    • Network Protection
    • MSP 1+1
    • SNCP/UPSR
    • Ethernet Ring Protection (ERPS G.8032)
    • Link Aggregation (Inter and Intra board)
    • LSP Linear Protection (1+1/1:1) sub 50ms
    • External/Internal/Line timing source with SSM
    • SyncE
    • IEEE 1588
    • TDM clocks
    • TM, ADM, and cross-connect
    • Full cross-connect at VC11/VC12/VC3/VC4 levels
    • Support framed and unframed VC4-4 and VC4-4c
    • External/Internal/Line timing source with SSM
    • Ethernet supports GFP, LAPS, VCAT, BCP, LCAS and non-LCAS
       
  • Management
     
    • Console port, VT100 menu-driven
    • SNMP port: Both v1 and v3 supported
    • Telnet, SSH, and Radius
    • Centralized management with Loop’s EMS/iNMS over DCC channel
    • Loop-iNET GUI Element Management System
    • TMN management (Loop-iNMS) with full FCAPS and end-to-end circuit management
       
  • RoHS compliant
     

 

 

 

 

 

Trib Cards
High-speed/ High Density (HS)
 

High-Speed / High Density (HS)

PTN10G

3 x 10GbE + 8 x 1GbE PTN plug-in module

PTNext

10 x 1GbE PTN plug-in module

B155/622

2-channel STM-1 (OC-3) tributaries with or without MSP 1+1
1-channel STM-4 (OC-12) tributaries with or without MSP 1+1

B2G5

1-channel STM-16 (OC-48) tributaries with or without MSP 1+1

E1/T1

63 port E1/T1 tributaries
32 port E1/T1 tributaries
16 port E1/T1 tributaries

E1(75 ohm)

63 E1(75 ohm) plug-in card
32 E1(75 ohm) plug-in card
16 E1(75 ohm) plug-in card

E3/T3

3 T3 or 3 E3 software programmable interface with M13/Mx3 function for T3 interface only

8GESW

8 GbE Ethernet over SDH card with L2 switch (8GES4SWA/8GES16SWA)

 

G7800

G7800 supports both MPLS-TP and Carrier Ethernet (EPL, EVPL, EPLAN, EVC defined in MEF) for packet transportation, as well as advanced L3 features for enterprise network services. In addition to native Ethernet transport, G7800 can be used as the gateway for PDH and SDH/SONET networks to enter PSNs using Circuit Emulation and Encapsulation technologies. Encapsulation technologies include TDMoE, TDMoIP, and TDMoMPLS. Circuit Emulation include CESoPSN (NxDS0/64K), SAToP (Unframed E1/T1), and CEP (SDH/SONET paths). Pseudowires make grooming and multiplexing DS0, E1/T1, and SDH/SONET paths easier, and service integrity can also be monitored and protected via packet network protection schemes.

One G7800 with core switching bandwidth up to 400Gbps supports 100GE, 40GE, 10GE and 1GE along with additional TDM interfaces, including STM-n/OC-n, E1/T1, and a rich variety of low-speed DS0 interfaces. The system is a perfect combination of PTN/CE, SDH, and PDH technologies.

G7800 provides high availability and reliability required by Carrier, Power Utility, Military, Government and Transportation applications by supporting MPLS-TP LSP 1:1/1+1 protection and ERPS, with protection switching time <50ms. Ethernet and MPLS section and end-to-end OAM are also provided for monitoring service integrity and performance. The G7800 is 7U in height, and its powerful functions enable customers to provision a service-grooming hub, ring, or mesh 10G packet network with ultimate ease.
G7800 comes with an environmentally friendly design. G7800 devices are products with low pollution. 90% of the metal structure uses low-pollution stainless steel and aluminum plates, which is more environmentally friendly than materials used in previous products. It also comes with detachable design, for easy assembly and disassembly. G7800 also comes with recyclable design; after it reaches end of life, its components can be dismantled for reuse, recycling, energy recovery, or other non-wasteful means.

 

High-Speed or High Density Tributary Modules

Loop-G7800-XGE-9XG-a-G*

9 x 10G Ethernet Port SFP Optical Interface

Loop-G7800-GFE-8T-a-G

8-port 10/100/1000Mbps BaseT Ethernet card

Loop-G7800-GFE-8POE1-a-G

8-port 10/100/1000Mbps BaseT Ethernet card with POE+ capability on every port.

The POE+ is powered from the system backplane with power limit of:
- 150W (Total Per Card)
- 30W (per Port)

Loop-G7800-GFE-8POE2-a-G

8-port 10/100/1000Mbps BaseT Ethernet card with POE+ capability on every port.

The POE+ is powered externally from the card front panel with power limit of:
- 240W (Total Per Card)
- 30W (per Port)

Loop-G7800-GFE-4POEP1-a-G

8-port 10/100/1000Mbps BaseT Ethernet card with POE++ capability on ports 2/4/6/8.
.
The POE++ is powered from system backplane with power limit of:
- 150W (Total Per Card)
- 90W (per Port)

Loop-G7800-GFE-4POEP2-a-G

8-port 10/100/1000Mbps BaseT Ethernet card with POE++ capability on ports 2/4/6/8.

The POE++ is powered externally from card front panel with power limit of:
- 360W (Total Per Card)
- 90W (per Port)
 

Loop-G7800-GFE-10S-a-G*

10-port 1GE or 1-port 10GE SFP Optical Interface Card

Loop-G7800-GFE-1XG-a-G*

1-port 10GE SFP+ Optical Interface Card

Loop-G7800-XCU-a-G*

SDH/SONET cross-connect card on a TDM-dedicated bus.
Supports 816 VC3 x 816 VC3 and 4032 VC12 x 4032 VC12 external interface, 1 x STM 64 or 2 x STM-16 or 8 x STM-4/1.
 

Loop-G7800-TE1-16-LoSW1-a-G

16-port T1 or 16-port E1(120 ohm) software programmable plug-in module with 1 x SCSI connector, supporting Unframed T1/E1 Circuit Emulation over PSN (SAToP) for Line to Switch

Loop-G7800-TE1-32-LoSW1-a-G

32-port T1 or 32-port E1(120 ohm) software programmable plug-in module with 2 x SCSI connectors, supporting Unframed T1/E1 Circuit Emulation over PSN (SAToP) for Line to Switch

Loop-G7800-TE1-FR-32-LoSW10-a-G

32-port T1 or E1(120 ohm) software programmable plug-in module with 2 x SCSI connectors, supporting both Framed & Unframed* T1/E1 Circuit Emulation over PSN (CES & SAToP) for Line to Switch

Loop-G7800-TE1-FR-32-LoXC1-a-G*

32-port T1 or E1(120 ohm) software programmable plug-in module with 2 x SCSI connectors, supporting both Framed & Unframed T1/E1 TDM over SONET/SDH Line traffic via XCU card

Loop-G7800-DS3-6-LoSW3-a-G*

6-port DS3 plug-in module with DIN 1.0/2.3 connectors, supporting DS3 CEP Circuit Emulation from Line to Switch.

Loop-G7800-DS3-6-LoSW31-a-G*

6-port DS3 plug-in module with DIN 1.0/2.3 connectors, supporting DS3 CEP Circuit Emulation from Line to Switch.

Loop-G7800-DS3-6-LoXC3-a-G*

6-port DS3 plug-in module with DIN 1.0/2.3 connectors, supporting DS3 TDM Line from Line to XCU.

Loop-G7800-DS3-6-LoXC31-a-G*

6-port DS3 plug-in module with DIN 1.0/2.3 connectors, supporting Unframed DS3 TDM Line from Line to XCU, with additional M13 DS1 SAToP being optionally enabled per port.

Loop-G7800-B2G5-1-LoSW410-a-G

Circuit Emulation for 1 x STM-16 or 1 x STM-4 or 1 x STM-1* Channelized Line Interface card, supporting Circuit Emulation for STM-n/OC-n traffic from physical Line to Switch

Used in CC-2/CHA 10GE slots (S3~S8), it supports One STM-16 or One STM-4 or One STM-1 interfaces without SFP (mini-GBIC) optical module.  The STM-n can be software configure as OC-3n for SONET application.

Loop-G7800-B2G5-1-XCoSWa-G*

Circuit Emulation for 1 x STM-16 or 1 x STM-4 or 1 x STM-1 Channelized Line Interface card, supporting Circuit Emulation for STM-n/OC-n traffic from XCU to Switch.

Used in CC-2/CHA 10GE slots (S3~S8), it supports One STM-16 or One STM-4 or One STM-1 interfaces without SFP (mini-GBIC) optical module. The STM-n can be software configure as OC-3n for SONET application.

Loop-G7800-B2G5-1-LoXC41-a-G*

Circuit Emulation for 1 x STM-16 or 1 x STM-4 or 1 x STM-1 Channelized Line Interface card, supporting STM-n/OC-n Line with native TDM VC/VT crossconnection to XCU.

Used in CC-2/CHA 10GE slots (S3~S8), it supports One STM-16 or One STM-4 or One STM-1 interfaces without SFP (mini-GBIC) optical module. The STM-n can be software configure as OC-3n for SONET application.

Loop-G7800-B2G5-2-LoSW410-a-G

Circuit Emulation for 2 x STM-16 or 2 x STM-4 or 2 x STM-1* Channelized Line Interface card, supporting Circuit Emulation for STM-n/OC-n traffic from physical Line to Switch

Used in CC-2/CHA 10GE slots (S3~S8), it supports Two STM-16 or Two STM-4 or Two STM-1 interfaces without SFP (mini-GBIC) optical module. The STM-n can be software configure as OC-3n for SONET application.

Loop-G7800-B2G5-2-XCoSWa-G*

Circuit Emulation for 2 x STM-16 or 2 x STM-4 or 2 x STM-1* Channelized Line Interface card, supporting Circuit Emulation for STM-n/OC-n traffic from XCU to Switch.

Used in CC-2/CHA 10GE slots (S3~S8), it supports Two STM-16 or Two STM-4 or Two STM-1 interfaces without SFP (mini-GBIC) optical module. The STM-n can be software configure as OC-3n for SONET application.

Loop-G7800-B2G5-2-LoXC41-a-G*

Circuit Emulation for 2 x STM-16 or 2 x STM-4 or 2 x STM-1* Channelized Line Interface card, supporting STM-n/OC-n Line with native TDM VC/VT crossconnection to XCU.

Used in CC-2/CHA 10GE slots (S3~S8), it supports Two STM-16 or Two STM-4 or Two STM-1 interfaces without SFP (mini-GBIC) optical module. The STM-n can be software configure as OC-3n for SONET application.

Loop-G7800-EoS-XCoSW41-a-G*

EoS (Ethernet Over SDH/SONET) processing card for two STM-16/OC-48 worth traffic from XCU card to Switch.
The Ethernet traffic can be tapped from any Ethernet UNI physical ports in the system or VPWS PW.
 

Loop-G7800-EoSCEPoSW41-a-G*

EoS (Ethernet Over SDH/SONET) processing card for up to two STM-16/OC-48 worth traffic over CEP. The EoS over CEP traffic is groomed from either local or remote B2G5/XCU card with CEP enabled.
The Ethernet traffic can be tapped from any Ethernet UNI physical ports in the system or VPWS PW.

 

 

Low Speed Tributary Modules
(Select 1 to 10 cards from Low Speed Tributary Modules list below)

Loop-G7800-8RS232-RJ-G

8-port RS232 plug-in card with X.50 subrate multiplexing scheme and X.54 encoding, with 8 RJ48 connectors for 8 RS232 Async ports

Loop-G7800-8RS232-DB-G

8-port RS232 plug-in card with X.50 subrate multiplexing scheme and X.54 encoding, with 2 RJ48 connectors and 2 DB44 connectors for Async and Sync ports

Loop-G7800-8DBRA-RJ-G*

8-channel data bridge plug-in card, with 8 RJ48 connectors for 8 data bridge Async ports

Loop-G7800-8DBRA-DB-G*

8-channel data bridge plug-in card, with 2 RJ48 connectors and 2DB44 connectors for 8 data bridge Async ports

Loop-G7800-8DCB-G*

8-channel dry contact type B plug-in card with maximum voltage 220 Vdc or 250 Vac

Loop-G7800-8DCC-G*

8-channel dry contact type C plug-in card with maximum voltage 100 Vdc or 250 Vac

Loop-G7800-RTB-G

8-LAN port/64 WAN ports router/bridge plug-in card

Loop-G7800-8SRU-DB-G

8-port SRU plug-in card with DS0B-5 subrate multiplexing scheme and DS0A encoding, with 2 RJ48 connectors and 2 DB44 connectors for Async and Sync ports

Loop-G7800-8SRU-RJ-G

8-port SRU plug-in card with DS0B-5 subrate multiplexing scheme and DS0A encoding, with 8 RJ48 connectors for Async ports

Loop-G7800-6UDTEA-G

Universal data interface card with software configurable modes for:
- Up to 6-port sub 64K RS232 with V.110, or
- Up to 4-port Nx64K X.21/RS232/RS422/V.35/V.36/ EIA530/RS449

Port 1 to 4: two DB44 connectors
Port 5 to 6: two RJ48 connectors

Loop-G7800-2GH-G*

2-channel G.SHDSL plug-in card (2 pair)

Loop-G7800-4GH-G*

4-channel G.SHDSL plug-in card (1 pair)

Loop-G7800-12FXOA-typ-G

12-channel FXOA plug-in card with 600/900 Impedance, Battery Reverse and Loop Start. Without Ground Start and Metering Pulse. Used with 12 RJ11

Loop-G7800-12FXOA-GS-typ-G

12-channel FXOA plug-in card with 600/900 Impedance, Battery Reverse, Loop Start and [Ground Start]. Used with 12 RJ11

Loop-G7800-12FXSA-02-sn-pta-typ-G

12-channel FXSA plug-in card with 600/900 Impedance, Battery Reverse, Loop Start and PLAR. Without Ground Start and Metering Pulse. Used with 12 RJ11 connectors or 1 Telco 64* connector.

12FXSA-02-GMP includes all FXS card functions
For sn option, please refer to the table below for detail information
pta= power type.

For pta option, please refer to the table below for detail information Please use with 100-240Vac or ±48Vdc powered main units.

Loop-G7800-12FXSA-02-P-sn-pta-typ-G

12-channel FXSA plug-in card with 600/900 Impedance, Battery Reverse, Loop Start, PLAR and [PLAR bit programmable]. Without Ground Start and Metering Pulse. Used with 12 RJ11 connectors or 1 Telco 64* connector.

Loop-G7800-12FXSA-02-M-sn- pta-typ-G

12-channel FXSA plug-in card with 600/900 Impedance, Battery Reverse, Loop Start, PLAR and [Metering Pulse]. Used with 12 RJ11 connectors or 1 Telco 64* connector.

Loop-G7800-12FXSA-02-MPP- sn-pta-typ-G

12-channel FXSA plug-in card with 600/900 Impedance, Battery Reverse, Loop Start, PLAR, [PLAR bit programmable] and [Metering Pulse]. Used with 12 RJ11 connectors or 1 Telco 64* connector.
 

Loop-G7800-12FXSA-02-GS- sn-pta-typ-G

12-channel FXSA plug-in card with 600/900 Impedance, Battery Reverse, Loop Start, PLAR and [Ground Start]. Used with 12 RJ11 connectors or 1 Telco 64* connector. 12FXSA-02-GMP includes all FXS card functions

pta= power type.

For sn, pt, and typ options, please refer to the table below for detail information. Please use with 100-240Vac or ±48Vdc powered main units.

Loop-G7800-12FXSA-02-GM-sn-pta-typ-G

12-channel FXSA plug-in card with 600/900 Impedance, Battery Reverse, Loop Start, PLAR, [Ground Start] and [Metering Pulse]. Used with 12 RJ11 connectors or 1 Telco 64* connector.

Loop-G7800-12FXSA-02-GMP-sn-pta-typ-G

12-channel FXSA plug-in card with 600/900 Impedance, Battery Reverse, Loop Start, PLAR, [PLAR bit programmable], [Ground Start] and [Metering Pulse].

Used with 12 RJ11 connectors or 1 Telco 64* connector

Loop-G7800-12MAGA-typ-G*

12-channel Magneto plug-in module with ring across L1&GND and L1&L2. Software programmable. Used with 12 RJ11 connectors

Loop-G7800-8EMA-x-pt-typ-G

8-channel 2W/4W E&MA plug-in card. Used with 8 RJ45 connectors or 1 Telco 64 connector.

Loop-G7800-4E1-cc-G

4-channel E1 plug-in card.
 
For cc option, please refer to the table below for detail information

Loop-G7800-4T1-G

4-channel T1 plug-in card

Loop-G7800-8UDTEA-opm-G*

8-port universal data interface card that supports RS232/RS422/RS485 full-duplex DCE interface which is software configurable

Available option mode: Terminal Server, Omnibus, and Clock Pass Through

Loop-G7800-6CDA-cdm-G*

6-channel G.703 Interface at 64 Kbps data rate. Per port configurable for Co-directional or Contra-directional interfaces.

Loop-G7800-4C37SFPA-G

4-channel C37.94 plug-in card (SFP port)

Loop-G7800-ODP-typ*

8-channel OCU-DP plug-in module. Used with 8 RJ48S connectors.

Loop-G7800-1FOMA-opt-G*

1FOMA Fiber Optical Interface with 1x9 optical port

 

 

 

 

Mini Plug-in Modules
(Select 1 to 6 cards from list below)

Loop-G7800-S1T1-G

1-channel T1 interface card

Loop-G7800-S1E75-G

1-channel of E1plug-in card w/ 75 ohm

Loop-G7800-S1E120-G

1-channel of E1 plug-in card w/ 120 ohm

Loop-G7800-SM4T1-G

Mini Quad T1 plug-in card

Loop-G7800-SM4E75-G

Mini Quad E1 plug-in card with 75 ohm

Loop-G7800-SM4E120-G

Mini Quad E1 plug-in card with 120 ohm

Loop-G7800-SFOM-opt-G*

Fiber Optical plug-in card

Loop-G7800-S1V35-G*

1-channel V.35 plug-in card

Loop-G7800-S1X21-G*

1-channel X.21 plug-in card

Loop-G7800-S1RS232-G*

1-channel RS232 plug-in c

Loop-G7800-S3RS232a-G*

3-channel RS232 async/Sync, DCE/DTE plug-in card

Loop-G7800-S1ODP*

1 port OCU DP Interface card

Loop-G7800-SQEMA-wr-m-Tn-x-G*

Jumper selectable: 2/4 WIRE; A/B side Quad E&M voice card

Loop-G7800-SQFXOA-x-G*

Quad FXO voice plug-in card used with 4 RJ11
- GS = Ground Start
- For -48 Vdc and AC (100 to 240 Vac) power supply only

Loop-G7800-SQFXOA-GS-x-G*

Quad FXO with GS plug-in card used with 4 RJ11

Loop-G7800-SQFXSA-x-pt-G*

Quad FXSA voice plug-in card
Jumper setting options: Loop Stsrt, Ground Start (GS), Metering Pulse Transmit 12/16 KHz (MP).

Loop-G7800-SQFXSA-M-x-pt-G*

Quad FXSA with MP 16 KHz voice plug-in card

Loop-G7800-SQFXSA-M12-x-pt-G*

Quad FXSA with MP 12 KHz voice plug-in card used

Loop-G7800-SQFXSA-GS-x-pt-G*

Quad FXSA with GS plug-in card

Loop-G7800-SQFXSA-GM-x-pt-G*

Quad FXSA with GS and MP 16 KHz voice plug-in card

Loop-G7800-SQMAGA-G*

Quad channel magneto plug-in card

Loop-G7800-SECA-G*

Echo canceller card

Loop-G7800-SABRA-G*

Analog Bridge Card for G7800

Loop-G7800-SRTA-G*

2-LAN ports/64 WAN port router/bridge plug-in card

Loop-G7800-SM1C37-LSFOM-G

1-channel C37.94 plug-in mini card

 

 

logo-psi

Please contact PSI at
 201.488.6000
for a quote

All logos, brand, product, service, and process names are trademarks or service marks of their respective holders and are protected by U.S. and international copyright laws and treaty provisions. All trademarks and registered trademarks are the sole property of their respective holders. All photographs are courtesy of respective manufacturers. All specifications, products, product names, schedules, content and prices are subject to change without notice. No warranty is made as to technical accuracy. No warranty is made with respect to the merchantability of any product, service or solution or the fitness of any product, service or solution for any particular purpose or use. Nothing contained herein shall be construed as conferring any license or right under any copyright, trademark, patent or other intellectual property rights. 250915-1201