ZHONE ETHERXTEND T1 2 PORT
HIGH-SPEED ETHERNET-BASED DUAL T1 CPE
Dual Port Loop Bonding T1 Network Extender
TNE1520-S, TNE1520-P, TNE1520-KIT
Overview
Ethernet over bonded T1 is ideal for delivering highly reliable, resilient access at rates up to 3Mbps. With the TNE1520, bonded groups are automatically created, removed and repaired, providing both ease of use as well as maximum uptime.
Zhone's T1 TNE1520 can be used in a point to point configuration with other T1 Network Extender Provider Units as well as EtherXtend Ethernet in the First Mile (EFM) CPE, or it can be used to terminate T1 lines from both Zhone's MALC Multiservice Access Loop Carrier and the IPD12000 Ethernet DSLAM.
The TNE1520 provides a simple and easy way to extend Ethernet over bonded T1 circuits for high speed access services at distances beyond the reach of xDSL circuits.
The TNE1520 is designed for ease-of-use; configuration requirements are removed completely, allowing this device to be installed into the customer premise quickly and cost-effectively. The TNE1520 is based on Ethernet transport technology over standard T1 lines, providing a 100% Ethernet-based access technology for optimum usability, throughput and reliability.
Features
- Provides plug 'n' play operation, including automatic loop bonding lines with NO configuration requirements
- Supports selectable T1 data rates up to 1.5Mbps per line (3Mbps aggregate)
- Configuration-free operation minimizes truck roll
- Connects directly to any Ethernet port on a PC or LAN
- Integrated CSU/DSU saves time, money, and rack space
- Excellent for front-ending IP Router 10 Mbps Ethernet ports
- Can be used with the Zhone MALC, EtherXtend, or 12000/4000 IP DSLAM products, as well as other T1 Network Extenders in point-to-point configurations
|
|
|
|
Dimensions
- 1.25" (3.2cm) High x 5.5" (14cm) Wide x 4.5" (11.5cm) Deep
Weight
Power
- 100-125VAC @ 1.0A
- 200-240VAC @ 0.5A
Interfaces
- 2 T1 RJ48C 8-position jack (un-channelized T1)
- 1 10/100 Ethernet RJ45
|
|
|
Regulatory Compliance
- EMC: FCC Part 15; CSA/C108.8; EN55022; EN55024;
CE Marking
- Safety: UL1950, CSA C22.2 No. 950; EN60950;
CE Marking
Operating Requirements
- Temperature: 32°F to 122°F (0°C to 50°C)
- Non-operating temperature: -40°F to 158°F
(-40°C to 70°C)
- Humidity: 5% to 95%, non-condensing
- Altitude: -200ft to 16,500ft (-60m to 5,000m)
|
|
Please contact PSI at 201.488.6000 for a quote
|
